Heat Shrink Tubing - Applications
Catheter Tip Forming - Tapering & Sealing - Process Steps
- Grab tube with one hand
- Place mandrel inside lumen which needs to be left open
- Place shrink tubing over tube end
- Hold the heat shrink tube over the multi lumen tube, then apply
heat using a Hot Air Station and at the same time pull and draw the heat shrink tube
using the tweezers. Caution: Ensure that the material does not touch the heat source.
- Allow product to cool
- Remove heat shrink tube and mandrel
- Trim tip as required
|
|
|
|